TCP/IP

Outcomes addressed in this activity:Describe ICMP messagesUse ping, tracert and pathpingExplain IGMPCourse outcomeDescribe the protocols and services available at each layer of the TCP/IP model.InstructionsThis Unit Assignment will cover ICMP messages, using ping, tracert and pathping commands and IGMP.Requirements• Open a command prompt. Open Wireshark and set it to capture. In the command prompt type ping google.com. Take a screen capture of the Wireshark window. Analyze the output of the PING. Explain the process the ICMP messages are using.• Open a command prompt. Open Wireshark and set it to capture. In the command prompt type tracert google.com. Take a screen capture of the Wireshark window. Analyze the output. Explain the process the ICMP messages are using• Given the following pathping output, explain the process as well as what the output tells you.D:>pathping -n testpc1Tracing route to testpc1 [7.54.1.196]over a maximum of 30 hops:0 172.16.87.351 172.16.87.2182 192.168.52.13 192.168.80.14 7.54.247.145 7.54.1.196Computing statistics for 125 seconds…Source to Here This Node/LinkHop RTT Lost/Sent = Pct Lost/Sent = Pct Address0 172.16.87.350/ 100 = 0% |1 41ms 0/ 100 = 0% 0/ 100 = 0% 172.16.87.21813/ 100 = 13% |2 22ms 16/ 100 = 16% 3/ 100 = 3% 192.168.52.10/ 100 = 0% |3 24ms 13/ 100 = 13% 0/ 100 = 0% 192.168.80.10/ 100 = 0% |4 21ms 14/ 100 = 14% 1/ 100 = 1% 7.54.247.140/ 100 = 0% |5 24ms 13/ 100 = 13% 0/ 100 = 0% 7.54.1.196Trace complete.• Write a brief synopsis on IGMP. What is it? What is its use? How is it used? Be sure to use your own words.+Written Requirements:Written work should be free of spelling, grammar, and APA errors. Points deducted from the grade for each writing, spelling, or grammar error are at your instructor’s discretion.Open a command prompt. Open Wireshark and set it to capture. In the command prompt type ping google.com. Take a screen capture of the Wireshark window. Analyze the output of the PING. Explain the process the ICMP messages are using.0 – 10Open a command prompt. Open Wireshark and set it to capture. In the command prompt type tracert google.com. Take a screen capture of the Wireshark window. Analyze the output. Explain the process the ICMP messages are using0 – 10Given the following pathping output, explain the process as well as what the output tells you.D:>pathping -n testpc1Tracing route to testpc1 [7.54.1.196]over a maximum of 30 hops:0 172.16.87.351 172.16.87.2182 192.168.52.13 192.168.80.14 7.54.247.145 7.54.1.196Computing statistics for 125 seconds…Source to Here This Node/LinkHop RTT Lost/Sent = Pct Lost/Sent = Pct0 – 10Project Grading RubricCourse: IT283 Unit: 3 Points: 40Copyright Kaplan UniversityAddress0 172.16.87.350/ 100 = 0%|1 41ms 0/ 100 = 0% 0/ 100 = 0% 172.16.87.218 13/ 100 = 13% |2 22ms 16/ 100 = 16% 3/ 100 = 3% 192.168.52.1 0/ 100 = 0% |3 24ms 13/ 100 = 13% 0/ 100 = 0% 192.168.80.1 0/ 100 = 0% |4 21ms 14/ 100 = 14% 1/ 100 = 1% 7.54.247.14 0/ 100 = 0% |5 24ms 13/ 100 = 13% 0/ 100 = 0% 7.54.1.196Trace complete.Write a brief synopsis on IGMP. What is it? What is its use? How is it used? Be sure to use your own words.0 – 10Column TotalLess deduction taken for spelling, grammar, and APA errors. Plagiarism is totally unacceptable.New total after deductions

Looking for this or a Similar Assignment? Click below to Place your Order

Open chat
%d bloggers like this: